4 General Rock Bit Auger Teeth Maintenance Tips

4 General Rock Bit Auger Teeth Maintenance Tips

8 July 2020 0 By rimrock

To maintain your rock bit auger teeth in the best condition and for a long time, there are several things that you need to keep in mind. One of these factors is the maintenance of the parts. Depending on the manufacturer’s maintenance schedule or a specialist recommendation, you need to observe it. Otherwise, you might have a problem with your drilling machine performance.

In this guide, we are providing you with the best rock bit auger teeth maintenance tips. Here are some of the things you need to do to keep your auger teeth in the best condition. Check out the following:

Regular Sharpening

One of the basic things that you need to do is sharpen your rock bit auger teeth. In most cases, these teeth are usually exposed to tough conditions, and this might make the tips of the bits blunt. That’s why you need to make the sharpening of the auger teeth a common practice. After using the machine for a while, you need to have the tips sharpened. This helps to give the machine a boost in its cutting performance.

Check alignment

One of the things that most be drilling machine users forget to check is the alignment of the rock bit auger teeth. This is a crucial factor that is likely to determine both the performance and productivity of the machine. What you need to do is to check the fastening of the auger teeth and is there are some loose because that’s what usually causes misalignment. So make sure that the auger teeth are aligned properly.

Maintain cleanliness

This is one of the most basic maintenance tips for rock bit auger teeth. You must ensure that your drilling machine parts are kept clean always. The dust, dirt, and other debris that are left on the machine after work could increase the rate of wear and tear of the teeth and other parts. Make sure that the auger is cleaned thoroughly after work. Use pressure cleaning because it’s more effective.

Lubricate the machine

Last but not least is lubricating your auger machine parts properly. When you don’t have the machine properly lubricated, then it tends to increase the rate of wear and tear of the parts due to friction. All the parts that affect the condition of the rock bit auger teeth should be lubricated to keep your cutter tools in good shape.